Projekt_Grafika/dependencies/physx-4.1/include/extensions/PxD6Joint.h
Jakub Adamski f5087ee7b6 new repo
2021-01-29 17:02:11 +01:00

562 lines
18 KiB
C++

//
// Redistribution and use in source and binary forms, with or without
// modification, are permitted provided that the following conditions
// are met:
// * Redistributions of source code must retain the above copyright
// notice, this list of conditions and the following disclaimer.
// * Redistributions in binary form must reproduce the above copyright
// notice, this list of conditions and the following disclaimer in the
// documentation and/or other materials provided with the distribution.
// * Neither the name of NVIDIA CORPORATION nor the names of its
// contributors may be used to endorse or promote products derived
// from this software without specific prior written permission.
//
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ``AS IS'' AND ANY
// EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
// IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
// PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
// CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
// EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
// PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
// PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY
// OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
//
// Copyright (c) 2008-2019 NVIDIA Corporation. All rights reserved.
// Copyright (c) 2004-2008 AGEIA Technologies, Inc. All rights reserved.
// Copyright (c) 2001-2004 NovodeX AG. All rights reserved.
#ifndef PX_D6JOINT_H
#define PX_D6JOINT_H
/** \addtogroup extensions
@{
*/
#include "extensions/PxJoint.h"
#include "extensions/PxJointLimit.h"
#include "foundation/PxFlags.h"
#if !PX_DOXYGEN
namespace physx
{
#endif
class PxD6Joint;
/**
\brief Create a D6 joint.
\param[in] physics The physics SDK
\param[in] actor0 An actor to which the joint is attached. NULL may be used to attach the joint to a specific point in the world frame
\param[in] localFrame0 The position and orientation of the joint relative to actor0
\param[in] actor1 An actor to which the joint is attached. NULL may be used to attach the joint to a specific point in the world frame
\param[in] localFrame1 The position and orientation of the joint relative to actor1
@see PxD6Joint
*/
PxD6Joint* PxD6JointCreate(PxPhysics& physics, PxRigidActor* actor0, const PxTransform& localFrame0, PxRigidActor* actor1, const PxTransform& localFrame1);
/**
\brief Used to specify one of the degrees of freedom of a D6 joint.
@see PxD6Joint
*/
struct PxD6Axis
{
enum Enum
{
eX = 0, //!< motion along the X axis
eY = 1, //!< motion along the Y axis
eZ = 2, //!< motion along the Z axis
eTWIST = 3, //!< motion around the X axis
eSWING1 = 4, //!< motion around the Y axis
eSWING2 = 5, //!< motion around the Z axis
eCOUNT = 6
};
};
/**
\brief Used to specify the range of motions allowed for a degree of freedom in a D6 joint.
@see PxD6Joint
*/
struct PxD6Motion
{
enum Enum
{
eLOCKED, //!< The DOF is locked, it does not allow relative motion.
eLIMITED, //!< The DOF is limited, it only allows motion within a specific range.
eFREE //!< The DOF is free and has its full range of motion.
};
};
/**
\brief Used to specify which axes of a D6 joint are driven.
Each drive is an implicit force-limited damped spring:
force = spring * (target position - position) + damping * (targetVelocity - velocity)
Alternatively, the spring may be configured to generate a specified acceleration instead of a force.
A linear axis is affected by drive only if the corresponding drive flag is set. There are two possible models
for angular drive: swing/twist, which may be used to drive one or more angular degrees of freedom, or slerp,
which may only be used to drive all three angular degrees simultaneously.
@see PxD6Joint
*/
struct PxD6Drive
{
enum Enum
{
eX = 0, //!< drive along the X-axis
eY = 1, //!< drive along the Y-axis
eZ = 2, //!< drive along the Z-axis
eSWING = 3, //!< drive of displacement from the X-axis
eTWIST = 4, //!< drive of the displacement around the X-axis
eSLERP = 5, //!< drive of all three angular degrees along a SLERP-path
eCOUNT = 6
};
};
/**
\brief flags for configuring the drive model of a PxD6Joint
@see PxD6JointDrive PxD6Joint
*/
struct PxD6JointDriveFlag
{
enum Enum
{
eACCELERATION = 1 //!< drive spring is for the acceleration at the joint (rather than the force)
};
};
typedef PxFlags<PxD6JointDriveFlag::Enum, PxU32> PxD6JointDriveFlags;
PX_FLAGS_OPERATORS(PxD6JointDriveFlag::Enum, PxU32)
/**
\brief parameters for configuring the drive model of a PxD6Joint
@see PxD6Joint
*/
class PxD6JointDrive : public PxSpring
{
//= ATTENTION! =====================================================================================
// Changing the data layout of this class breaks the binary serialization format. See comments for
// PX_BINARY_SERIAL_VERSION. If a modification is required, please adjust the getBinaryMetaData
// function. If the modification is made on a custom branch, please change PX_BINARY_SERIAL_VERSION
// accordingly.
//==================================================================================================
public:
PxReal forceLimit; //!< the force limit of the drive - may be an impulse or a force depending on PxConstraintFlag::eDRIVE_LIMITS_ARE_FORCES
PxD6JointDriveFlags flags; //!< the joint drive flags
/**
\brief default constructor for PxD6JointDrive.
*/
PxD6JointDrive(): PxSpring(0,0), forceLimit(PX_MAX_F32), flags(0) {}
/**
\brief constructor a PxD6JointDrive.
\param[in] driveStiffness The stiffness of the drive spring.
\param[in] driveDamping The damping of the drive spring
\param[in] driveForceLimit The maximum impulse or force that can be exerted by the drive
\param[in] isAcceleration Whether the drive is an acceleration drive or a force drive
*/
PxD6JointDrive(PxReal driveStiffness, PxReal driveDamping, PxReal driveForceLimit, bool isAcceleration = false)
: PxSpring(driveStiffness, driveDamping)
, forceLimit(driveForceLimit)
, flags(isAcceleration?PxU32(PxD6JointDriveFlag::eACCELERATION) : 0)
{}
/**
\brief returns true if the drive is valid
*/
bool isValid() const
{
return PxIsFinite(stiffness) && stiffness>=0 &&
PxIsFinite(damping) && damping >=0 &&
PxIsFinite(forceLimit) && forceLimit >=0;
}
};
/**
\brief A D6 joint is a general constraint between two actors.
It allows the application to individually define the linear and rotational degrees of freedom,
and also to configure a variety of limits and driven degrees of freedom.
By default all degrees of freedom are locked. So to create a prismatic joint with free motion
along the x-axis:
\code
...
joint->setMotion(PxD6Axis::eX, PxD6JointMotion::eFREE);
...
\endcode
Or a Revolute joint with motion free allowed around the x-axis:
\code
...
joint->setMotion(PxD6Axis::eTWIST, PxD6JointMotion::eFREE);
...
\endcode
Degrees of freedom may also be set to limited instead of locked.
There are two different kinds of linear limits available. The first kind is a single limit value
for all linear degrees of freedom, which may act as a linear, circular, or spherical limit depending
on which degrees of freedom are limited. This is similar to a distance limit. Then, the second kind
supports a pair of limit values for each linear axis, which can be used to implement a traditional
prismatic joint for example.
If the twist degree of freedom is limited, is supports upper and lower limits. The two swing degrees
of freedom are limited with a cone limit.
@see PxD6JointCreate() PxJoint
*/
class PxD6Joint : public PxJoint
{
public:
/**
\brief Set the motion type around the specified axis.
Each axis may independently specify that the degree of freedom is locked (blocking relative movement
along or around this axis), limited by the corresponding limit, or free.
\param[in] axis the axis around which motion is specified
\param[in] type the motion type around the specified axis
<b>Default:</b> all degrees of freedom are locked
@see getMotion() PxD6Axis PxD6Motion
*/
virtual void setMotion(PxD6Axis::Enum axis, PxD6Motion::Enum type) = 0;
/**
\brief Get the motion type around the specified axis.
@see setMotion() PxD6Axis PxD6Motion
\param[in] axis the degree of freedom around which the motion type is specified
\return the motion type around the specified axis
*/
virtual PxD6Motion::Enum getMotion(PxD6Axis::Enum axis) const = 0;
/**
\brief get the twist angle of the joint, in the range (-2*Pi, 2*Pi]
*/
virtual PxReal getTwistAngle() const = 0;
/**
\brief get the twist angle of the joint
\deprecated Use getTwistAngle instead. Deprecated since PhysX version 4.0
*/
PX_DEPRECATED PX_FORCE_INLINE PxReal getTwist() const { return getTwistAngle(); }
/**
\brief get the swing angle of the joint from the Y axis
*/
virtual PxReal getSwingYAngle() const = 0;
/**
\brief get the swing angle of the joint from the Z axis
*/
virtual PxReal getSwingZAngle() const = 0;
/**
\brief Set the distance limit for the joint.
A single limit constraints all linear limited degrees of freedom, forming a linear, circular
or spherical constraint on motion depending on the number of limited degrees. This is similar
to a distance limit.
\param[in] limit the distance limit structure
@see getDistanceLimit() PxJointLinearLimit
*/
virtual void setDistanceLimit(const PxJointLinearLimit& limit) = 0;
/**
\brief Get the distance limit for the joint.
\return the distance limit structure
@see setDistanceLimit() PxJointLinearLimit
*/
virtual PxJointLinearLimit getDistanceLimit() const = 0;
/**
\deprecated Use setDistanceLimit instead. Deprecated since PhysX version 4.0
*/
PX_DEPRECATED PX_FORCE_INLINE void setLinearLimit(const PxJointLinearLimit& limit) { setDistanceLimit(limit); }
/**
\deprecated Use getDistanceLimit instead. Deprecated since PhysX version 4.0
*/
PX_DEPRECATED PX_FORCE_INLINE PxJointLinearLimit getLinearLimit() const { return getDistanceLimit(); }
/**
\brief Set the linear limit for a given linear axis.
This function extends the previous setDistanceLimit call with the following features:
- there can be a different limit for each linear axis
- each limit is defined by two values, i.e. it can now be asymmetric
This can be used to create prismatic joints similar to PxPrismaticJoint, or point-in-quad joints,
or point-in-box joints.
\param[in] axis The limited linear axis (must be PxD6Axis::eX, PxD6Axis::eY or PxD6Axis::eZ)
\param[in] limit The linear limit pair structure
@see getLinearLimit()
*/
virtual void setLinearLimit(PxD6Axis::Enum axis, const PxJointLinearLimitPair& limit) = 0;
/**
\brief Get the linear limit for a given linear axis.
\param[in] axis The limited linear axis (must be PxD6Axis::eX, PxD6Axis::eY or PxD6Axis::eZ)
\return the linear limit pair structure from desired axis
@see setLinearLimit() PxJointLinearLimit
*/
virtual PxJointLinearLimitPair getLinearLimit(PxD6Axis::Enum axis) const = 0;
/**
\brief Set the twist limit for the joint.
The twist limit controls the range of motion around the twist axis.
The limit angle range is (-2*Pi, 2*Pi).
\param[in] limit the twist limit structure
@see getTwistLimit() PxJointAngularLimitPair
*/
virtual void setTwistLimit(const PxJointAngularLimitPair& limit) = 0;
/**
\brief Get the twist limit for the joint.
\return the twist limit structure
@see setTwistLimit() PxJointAngularLimitPair
*/
virtual PxJointAngularLimitPair getTwistLimit() const = 0;
/**
\brief Set the swing cone limit for the joint.
The cone limit is used if either or both swing axes are limited. The extents are
symmetrical and measured in the frame of the parent. If only one swing degree of freedom
is limited, the corresponding value from the cone limit defines the limit range.
\param[in] limit the cone limit structure
@see getLimitCone() PxJointLimitCone
*/
virtual void setSwingLimit(const PxJointLimitCone& limit) = 0;
/**
\brief Get the cone limit for the joint.
\return the swing limit structure
@see setLimitCone() PxJointLimitCone
*/
virtual PxJointLimitCone getSwingLimit() const = 0;
/**
\brief Set a pyramidal swing limit for the joint.
The pyramid limits will only be used in the following cases:
- both swing Y and Z are limited. The limit shape is then a pyramid.
- Y is limited and Z is locked, or vice versa. The limit shape is an asymmetric angular section, similar to
what is supported for the twist axis.
The remaining cases (Y limited and Z is free, or vice versa) are not supported.
\param[in] limit the cone limit structure
@see getLimitCone() PxJointLimitPyramid
*/
virtual void setPyramidSwingLimit(const PxJointLimitPyramid& limit) = 0;
/**
\brief Get the pyramidal swing limit for the joint.
\return the swing limit structure
@see setLimitCone() PxJointLimitPyramid
*/
virtual PxJointLimitPyramid getPyramidSwingLimit() const = 0;
/**
\brief Set the drive parameters for the specified drive type.
\param[in] index the type of drive being specified
\param[in] drive the drive parameters
@see getDrive() PxD6JointDrive
<b>Default</b> The default drive spring and damping values are zero, the force limit is zero, and no flags are set.
*/
virtual void setDrive(PxD6Drive::Enum index, const PxD6JointDrive& drive) = 0;
/**
\brief Get the drive parameters for the specified drive type.
\param[in] index the specified drive type
@see setDrive() PxD6JointDrive
*/
virtual PxD6JointDrive getDrive(PxD6Drive::Enum index) const = 0;
/**
\brief Set the drive goal pose
The goal is relative to the constraint frame of actor[0]
<b>Default</b> the identity transform
\param[in] pose The goal drive pose if positional drive is in use.
\param[in] autowake Whether to wake the joint rigids up if it is asleep.
@see setDrivePosition()
*/
virtual void setDrivePosition(const PxTransform& pose, bool autowake = true) = 0;
/**
\brief Get the drive goal pose.
@see getDrivePosition()
*/
virtual PxTransform getDrivePosition() const = 0;
/**
\brief Set the target goal velocity for drive.
The velocity is measured in the constraint frame of actor[0]
\param[in] linear The goal velocity for linear drive
\param[in] angular The goal velocity for angular drive
\param[in] autowake Whether to wake the joint rigids up if it is asleep.
@see getDriveVelocity()
*/
virtual void setDriveVelocity(const PxVec3& linear, const PxVec3& angular, bool autowake = true) = 0;
/**
\brief Get the target goal velocity for joint drive.
\param[in] linear The goal velocity for linear drive
\param[in] angular The goal velocity for angular drive
@see setDriveVelocity()
*/
virtual void getDriveVelocity(PxVec3& linear, PxVec3& angular) const = 0;
/**
\brief Set the linear tolerance threshold for projection. Projection is enabled if PxConstraintFlag::ePROJECTION
is set for the joint.
If the joint separates by more than this distance along its locked degrees of freedom, the solver
will move the bodies to close the distance.
Setting a very small tolerance may result in simulation jitter or other artifacts.
Sometimes it is not possible to project (for example when the joints form a cycle).
<b>Range:</b> [0, PX_MAX_F32)<br>
<b>Default:</b> 1e10f
\param[in] tolerance the linear tolerance threshold
@see getProjectionLinearTolerance() PxJoint::setConstraintFlags() PxConstraintFlag::ePROJECTION
*/
virtual void setProjectionLinearTolerance(PxReal tolerance) = 0;
/**
\brief Get the linear tolerance threshold for projection.
\return the linear tolerance threshold
@see setProjectionLinearTolerance()
*/
virtual PxReal getProjectionLinearTolerance() const = 0;
/**
\brief Set the angular tolerance threshold for projection. Projection is enabled if
PxConstraintFlag::ePROJECTION is set for the joint.
If the joint deviates by more than this angle around its locked angular degrees of freedom,
the solver will move the bodies to close the angle.
Setting a very small tolerance may result in simulation jitter or other artifacts.
Sometimes it is not possible to project (for example when the joints form a cycle).
<b>Range:</b> [0,Pi] <br>
<b>Default:</b> Pi
\param[in] tolerance the angular tolerance threshold in radians
\note
Angular projection is implemented only for the case of two or three locked angular degrees of freedom.
@see getProjectionAngularTolerance() PxJoint::setConstraintFlag() PxConstraintFlag::ePROJECTION
*/
virtual void setProjectionAngularTolerance(PxReal tolerance) = 0;
/**
\brief Get the angular tolerance threshold for projection.
\return tolerance the angular tolerance threshold in radians
@see setProjectionAngularTolerance()
*/
virtual PxReal getProjectionAngularTolerance() const = 0;
/**
\brief Returns string name of PxD6Joint, used for serialization
*/
virtual const char* getConcreteTypeName() const { return "PxD6Joint"; }
protected:
//serialization
/**
\brief Constructor
*/
PX_INLINE PxD6Joint(PxType concreteType, PxBaseFlags baseFlags) : PxJoint(concreteType, baseFlags) {}
/**
\brief Deserialization constructor
*/
PX_INLINE PxD6Joint(PxBaseFlags baseFlags) : PxJoint(baseFlags) {}
/**
\brief Returns whether a given type name matches with the type of this instance
*/
virtual bool isKindOf(const char* name) const { return !::strcmp("PxD6Joint", name) || PxJoint::isKindOf(name); }
//~serialization
};
#if !PX_DOXYGEN
} // namespace physx
#endif
/** @} */
#endif